To meet the use requirements of encoder for CNC industry, Delta has launched a new encoder product specialized for CNC Machine Tool¡V CS7 series. For the solution of high resonance and much oil & gas problem occurred in machine tool application, CS7 series not only have the new mechanical design, but also provide high standard electric specifications. The corresponding rotation speed of CS7 series can achieve 8000rpm, and the response frequency of output signal can also reach 300kHZ. This new series product can satisfy the needs of all kinds of CNC machine tools.
Now, only CS7-11LNR5HM and CS7-11LNR9HM these two models are available for order. For the model explanation, please refer to the following description. For more information please visit our site.
Model Explanation:
C |
S |
7 |
- |
1 |
1 |
L |
N |
R |
5 |
H |
M |
¡ö
Example
|
1 |
2 |
3 |
- |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
¡ö
Code
Order
|
Code Order:
1. Product type: C = Incremental Encoder for CNC machine tool
2. Shaft type: S = Solid Shaft
3. Outer diameter: 7 = 70mm
4. Resolution: 11=1024ppr
5. Output form: L = Line Driver
6. Signal output: N = A, B & Z (Ungated)
7. Shaft/Bore diameter: R = 15mm Dia.
8. Input voltage: 5 = 5V; 9 = 7~24V
9. Operating environment: H = IP55 & 70¢XC
10. Cable length: M= Military Connector |
