| |
Introduction:
VFD-VE adopts FOC (Field Oriented Control) vector control method. It can be used not only in speed control but also in position control just like a servo motor drive. And multi-function I/O terminal is abundant to be set to meet users' various application needs. In addition, it supplies PC monitor software based on Windows for parameters management and dynamic monitor. It gives a good solution for load regulation. It can output 150% of rated torque at zero speed, and it can have Ħ§point to pointĦ¨ and relative distance control function in position control, therefore it is the best choice for senior application in industry control.
Features:
| ĦE |
Output frequency: 0~600Hz |
| ĦE |
4 points adjustable V/f curve, Sensorless Vector Control, Field-Oriented control |
| ĦE |
Position/Speed/Torque control mode |
| ĦE |
Sensorless Vector Control 150% torque at 0.5Hz |
| ĦE |
150% holding torque with speed feedback |
| ĦE |
Overload : 150% for 1 minute and 200% for 2 seconds |
| ĦE |
Rotational/Static Auto-tuning for the motor perameters and Auto-tuning for load inertia |
| ĦE |
4 quadrants torque control exclusive designed for crane and unwinder |
| ĦE |
Dual RS-485 ports, Fieldbus and PC software tools for applications |
New functions: 
Applications:
Woodcarving machine, crane, drilling machine , NC latch, main axis of tool machine and PCB
For more information on Delta's VFD-VE series, please visit our website.
|
|
